1. Physical & Environmental Specifications
- Dimensions (H×W×D): 1356×620×849mm
- Weight (Basic unit): 110kg
- Storage temperature: -20-55°C
- Working temperature: 10-40°C
- Storage humidity: ≤93%
2. Electrical Specifications
- Power input: AC 100-240V, 50/60Hz
- Battery: DC 24V, minimum 120min
- Electrical outlets: 3
- Power failure alarm: Supported
3. Pneumatic Specifications
- Gas supply pressure: 0.28~0.6MPa
- Flowmeters (Basic config) – N₂O: 0~1L/min; 1~10L/min
- Flowmeters (Full config) – N₂O: 0~1L/min; 1~12L/min; Air: 0~1L/min; 1~15L/min
- Gas system functions: O₂ supply failure alarm; O₂ supply failure protection; O₂ flush: 25-75L/min
- Working modes: Closed, Semi-closed, Semi-open
- Driven mode: Pneumatically driven and electronically controlled
- Safety valve pressure: ≤10kPa
- Operating modes: Man./Vent.
- Cylinder yokes (Optional): O₂, N₂O
4. Ventilator Specifications
4.1 Basic Config
- Patient types: Adult, pediatric
- Ventilation modes: IPPV, PCV, SIMV-VC, Manual, PS/CPAP (with apnea backup), Standby
- Tidal volume: 20-1500ml
- Ventilation frequency: 2~100bpm
- I:E ratio: 4:1~1:8
- Electronic PEEP: OFF, 3-30cmH₂O
- Inspiratory plateau: OFF, 5~60%
- Flow trigger: 1~15L/min
- Pressure range: 5-70cmH₂O
- Pressure support: 3~50cmH₂O
- Graph display: P-t, F-t, V-t waveforms
4.2 Full Config
- Additional ventilation modes: SIMV-PC
- Extended graph display: P-t, F-t, V-t waveforms, P-V and F-V loops
5. Monitoring Functions
5.1 Ventilation Monitoring
- Pressure parameters: PIP, Pplat, PEEP
- Volume parameters: MV, VI
- Other parameters: Respiratory frequency, Compliance
5.2 Gas Monitoring (Optional)
- Monitored gases: O₂, CO₂, Agent
- Optional modules: AGSS, Suction, AGM, EtCO₂
6. Alarm Functions
- Airway Pressure: High/Low
- Minute Volume: High/Low
- FiO₂: High/Low (when FiO₂ function is enabled)
- Fault alarms: Power failure, O₂ Supply failure, Apnea
7. Vaporizer Specifications
- Supported quantity: 2 vaporizers (Selectatec* with interlock); Optional 3rd vaporizer holder
- Compatible agents: Halothane, Enflurane, Isoflurane, Sevoflurane
- Filling types: Pour-fill, Key-fill, Quik-fill*
8. Core Features
- Flowmeter design: Dual-tube mechanical flowmeter for each gas
- Safety design: Low-oxygen prevention (inhaled O₂ concentration ≥21%)
- Breathing system material: Alloy (robust, corrosion-resistant, easy to clean)
- Flow sensor: Built-in non-consumable
- APL valve: Alloy with fast-release function
- Operation convenience: One-key switch (manual ↔ mechanical ventilation); One-key switch to ACGO mode
- Display: 8.4-inch color touch screen + Setting Navigator knob